Device Details
Overview
| Name | Version: | ROLAND JUNO-106 MIDI SysEx Controller 1.1 |
| Author: | Pibo |
| Device Type: | MIDI Effect |
| Description: | ROLAND JUNO-106 Max for Live 8 device. Control your JUNO-106 hardware directly from Ableton Live 10. SETUP 1. Create a new External Instrument track and select the "MIDI To" and "Audio From" related to your JUNO-106 hardware connections. 2. Insert JUNO-106.amxd into that track. UPDATES 1.0 First release. 1.1 GUI redesign. KNOWN ISSUES / LIMITATIONS - At this moment this device only works from Ableton to the Roland Juno 106. If you move any slider directly on the physical synth, the sliders on the screen won't move. - Managing patches (sounds) is not yet supported. THANKS TO @Roda and @Odeso for the previous versions, and Darwin G. and Cory from Cycling 74 for their kindly support. |
Details
| Live Version Used: | 10.0.4 |
| Max Version Used: | 8.0.1 |
| Date Added: | Oct 17 2018 12:47:01 |
| Date Last Updated: | Jan 26 2019 16:10:58 |
| Downloads: | 1007 |
| ⓘ License: | None |
Average Rating
(1) Log in to rate this device |
5 |
Files
| Device File: | JUNO-106.amxd |
Comments
Beautiful work! Very happy about this as my filter slider is broken, so I can finally control it properly again.
Posted on March 20 2019 by chymera |
Report Issue
Hi, I love this M4L instrument, it's really saved me a lot of work.
However, I've noticed that when you assign an automation track to one of the parameters, if that automation is 'smooth', IE a linear increase or slow sine wave, it can overwhelm the MIDI bus as Live is sending many thousands of very fine adjustments into the instrument.
I've made a change that I'd like you to consider, which adds fixed CC assignments to each of the parameters:
https://github.com/squeeb/JUNO-106-M4L
By using modulation instead of automation, you can use the standard MIDI CC values to alter the instrument's parameters, thus only sending a MIDI event when a value changes.
However, I've noticed that when you assign an automation track to one of the parameters, if that automation is 'smooth', IE a linear increase or slow sine wave, it can overwhelm the MIDI bus as Live is sending many thousands of very fine adjustments into the instrument.
I've made a change that I'd like you to consider, which adds fixed CC assignments to each of the parameters:
https://github.com/squeeb/JUNO-106-M4L
By using modulation instead of automation, you can use the standard MIDI CC values to alter the instrument's parameters, thus only sending a MIDI event when a value changes.
Posted on January 17 2021 by squeeb |
Report Issue
Can't seem to get it transmit any data, won't change any parameters on the synth
Posted on October 27 2021 by Bt63 |
Report Issue
Hello mate! Tried this in Live 10 and 11 but can't get it working for the life of me. Checked MIDI channels, tried different cables, different midi interfaces. Would LOVE to get this to work so any pointers would be incredible.
Posted on February 03 2022 by kitzie |
Report Issue
Thank you squeeb!
Posted on September 13 2022 by athi |
Report Issue
Hello,
I made a small update of squeeb's patch as I had troubles to use it.
I added a few "change" objects to filter down the amout of message sent in order to increase the fluidity of the patch.
https://github.com/Kluper/juno_106_2/tree/main
regards
Lucien
I made a small update of squeeb's patch as I had troubles to use it.
I added a few "change" objects to filter down the amout of message sent in order to increase the fluidity of the patch.
https://github.com/Kluper/juno_106_2/tree/main
regards
Lucien
Posted on September 19 2024 by Lukenzoner1 |
Report Issue
Hey all,
I remade the whole patch.
You need to open both max/msp and max4live to use it.
You can note that this system allows us to touch sliders in real team and it's updated in real time in max/msp and live.
M4l is used to write automations and have a coherent user interface (not as pleasant as pibo's one) and max is used to transmit the datas.
It's not a straight forward plug and play solution but it's robust.
https://github.com/Kluper/juno_106_2
Cheers lucien
I remade the whole patch.
You need to open both max/msp and max4live to use it.
You can note that this system allows us to touch sliders in real team and it's updated in real time in max/msp and live.
M4l is used to write automations and have a coherent user interface (not as pleasant as pibo's one) and max is used to transmit the datas.
It's not a straight forward plug and play solution but it's robust.
https://github.com/Kluper/juno_106_2
Cheers lucien
Posted on September 21 2024 by Lukenzoner1 |
Report Issue
Login to comment on this device.
Browse the full library