Device Details
Overview
| Name | Version: | StutDown 1.0 |
| Author: | VKondakoff |
| Device Type: | Audio Effect |
| Description: | Use this device to create granular pitch-downs and build-ups. You can set the envelope, envelope duration (from 1 to 10 seconds) and the stutter/granular rate, which is synchronised to Ableton Live tempo. 8 slots for user-defined presets are available. Usage: drop StutDown onto any MIDI or audio Ableton Live track, make some sound and press Stuttrr button to start granular pitch-down or build-up. If the envelope goes from 0 to 1, the pitch will go up. If the envelope goes from 1 to 0 the pitch will go down. An envelope set to a horizontal line will produce a static pitch. Click the envelope window to ctreate new points, shift-click to remove available points. Use Time dial change the envelope duration (from 1 to 10 seconds). The stutter rate buttons allows you to change the speed of the looping of the sound: the more vertical stripes - the faster is the granular effect. You can save up to 8 combinations of Stutter rate, Time Dial and Envelope in the Presets section. Shift-click the slot to save a preset, click to restore the preset. StutDown was tested to work in Ableton Live 10/Max 8.0.3 (macOS Mojave/Windows 10). Note, please, Max 8 (or later) is required to run StutDown. Short video: https://youtu.be/pfwoZ4jiBts Price: $1 Version 1.0 (Feb 2019) - Initial release Here you can view my other M4L devices: https://gumroad.com/valery_kondakoff |
Details
| Live Version Used: | 10.0.1 |
| Max Version Used: | 8.0.3 |
| Date Added: | Feb 01 2019 17:43:15 |
| Date Last Updated: | May 08 2020 20:26:09 |
| Downloads: | 0 |
| Website: | https://gumroad.com/l/wrfIO |
| ⓘ License: | Commercial |
Average Rating
Log in to rate this device |
-n/a- |
Comments
Looks cool! Would be cool if there was a bar length option 1.1.1 format that was tempo-synced in addition to the length in seconds option.
Posted on February 05 2019 by itsBREX |
Report Issue
Looks like a good device at a fair price!
Maybe it's beyond the scope of the device, but could be interesting if there was a hold mode and repeat length. Eg, one could activate hold and with a default repeat length of 1x, it effectively loops the envelope continually. But it could be set at a multiplier. Eg 2x would mean that the envelope stage would run, and then the signal would be dry for the same length of time, and then activates again and so on.
Maybe it's beyond the scope of the device, but could be interesting if there was a hold mode and repeat length. Eg, one could activate hold and with a default repeat length of 1x, it effectively loops the envelope continually. But it could be set at a multiplier. Eg 2x would mean that the envelope stage would run, and then the signal would be dry for the same length of time, and then activates again and so on.
Posted on March 23 2019 by nexusqu |
Report Issue
Login to comment on this device.
Browse the full library